Metallic ceramic polished to a high lustre with a stainless chrome appearance that will not rust.

It can withstand temperatures of 760°C (1400°F).

The best chemical and corrosion protection of any exhaust coating with excellent thermal barrier characteristics, providing a reduction in radiated heat with reduced under-hood temperatures, accelerated gas velocity resulting in an increase in fuel economy and HP.

Advanced ceramic reinforced coating, which can withstand 1000°C (1800°F) making it the most efficient thermal barrier coating available.

Increasing performance while extending component life makes this coating an excellent choice for turbo housings and turbo manifolds.

Offering no thermal, lubrication or friction characteristics, these coatings are primarily for visual appeal only, while also providing protection against rust and oxidisation.

Available in red, blue, green, silver, orange, purple and pink.

Applications are as large as your imagination, but some typical examples are:

Rocker Covers
Inlet Manifold
Pulleys/Bolts/Brackets
Turbo Compressor Housing
Blowoff Valve
Throttle Body

Have excellent thermal characteristics without the tendency to crack or flake. It increases combustion chamber efficiency through more efficient oxidation of fuel. In addition the highly reflective surface provides minimal transfer of residual combustion chamber heat to incoming air fuel mass, thus reducing the chance of detonation which also aids performance. It also has excellent carbon shedding characteristics.

Commonly used for the following applications:

Combustion Chambers
Inlet and Exhaust valves
Exhaust Port
Underneath Inlet Manifold

Provides increased lubrication and reduced friction at loads in excess of 350,000 psi, while also aiding in the prevention of scuffing and galling.

Commonly used for the following applications:

Valve Springs
Valve Covers
Piston Skirt
Conrod
Pushrod
Crankshaft
Sump
Windage Tray